How can sand and gravel plants improve the sand output rate of sand making machines?

There are several ways to improve the sand production rate of a sand making machine:

Material aspects:

The hardness, toughness, humidity, and viscosity of the material all affect the output of the sand making machine. Different materials have different physical properties, so it is necessary to select the appropriate sand making machine model and parameter settings according to the characteristics of the material. At the same time, try to choose materials with moderate hardness for sand making, avoiding the impact on the normal operation of the sand making machine due to excessively high or low material hardness.

Consultation on improving sand making machine output rate

Equipment aspects:

1. Regularly check the wear of internal parts:  Worn internal parts of the sand making machine should be replaced promptly; otherwise, it will delay production and affect the sand making efficiency.  At the same time, strengthen equipment maintenance and upkeep, regularly check the operating status of the equipment and the wear of parts, and promptly identify and solve problems.

2. Regularly check the tension of the motor's V-belt: The sand making efficiency is also affected by power transmission, and the main factor affecting power transmission is the tension of the V-belt. Therefore, pay attention to the tension of the power transmission belt and make daily adjustments to ensure that it does not affect production efficiency.

3. Check the impeller speed: When the impeller speed of the sand making machine is too low, it will lead to insufficient throwing speed, insufficient collision or impact force between the material and the protective plate, and the sand production rate will be greatly reduced. Therefore, ensuring that the speed is within the normal range is crucial.

4. Ensure proper sealing: After the sand making machine has been running for a long time, the sealing parts will gradually wear out. If not adjusted for a long time, dust can easily enter the bearings or oil passages, causing the sand making machine's lubrication to lose its effectiveness. This will accelerate bearing wear and reduce its lifespan. Therefore, regular maintenance of the sealing condition is essential.

5. Pay attention to strengthening vibration reduction: Excessive vibration not only directly affects the operating state of the sand making machine and its components, but also reduces the service life of the sand making machine. Therefore, vibration reduction work must be done well.

6. Operate according to oil temperature warnings: Because a high oil temperature in the sand making machine indicates serious bearing overheating, the machine should be stopped immediately for inspection, and production should resume only after the fault is eliminated.